NOTE: THIS ARTICLE IS REPRODUCED FROM WECHAT PUBLIC ACCOUNT: JMT20190612
ORIGINAL AUTHOR: 巨胖界的瘦子
TRANSLATED AND ADAPTED BY: PHIL13
Dear friends, we are back for evalution articles.
Since now the CoronaVirus is prevalent all over the world, please TAKE GOOD CARE of YOURSELVES and the ONE(S) YOU LOVE! Wear face mask to prevent the virus and try to stay home without gathering outdoors. Everything will be alright finally and stay strong dear friends!
This time we will present Mould King's Bulldozer 13122.
Separate Packs , Instruction Manual and Stickers
The PF packs are equipped with 4.0 batteries, which enables fans to play outside without remote controllers.
The tyres and wheels.
BEFORE ASSEMBLY: Please test the PF set's function. But since you buy from JOYING who is very responsible, you might choose to skip this step(LOL).
OK Let's cut it short and start right away!
Please make sure that all gears are tested in each step. They should not be too tight so that the linkage will be more smooth.
There is a mistake--the swing arm on the instructions manual.
The differential should not be made too tight, either.
Double M-motors with D labels.
Other motors' connections.
The rear part of bulldozer is heavy as the real circumstance is. It is to avoid the danger of turning over when the shovel is full.
Here are four universal joints that need you to pay more attention and patience.
The push rod is updated version by Mould King.
The whole vehicle is finished!
The Finished Bulldozer Display
1. In the early stages the crossheads must be carefully checked as they are extremly similar. They are of 5, 6, 7, 8, 9 units' lengths.
2. In Step 52 the drawing is wrong. It is the hole outside of the small putter that should be connected.