I was drawn to the different print patterns on these from many of the other figs on the site.  They might be UV printed?  You can feel a raised texture on the torso, legs, but the quality seems pretty good to me.
 
The common issues with the knockoff figs can be a little bad here.  Some of the torsos and legs I could not separate except with a good amount of force.  Some of the legs are very hard to move, and the legs fit pretty snuggly on studs.
 
If you are looking mainly for display and infrequent posing, you shouldn't have any problems.  If you are constantly moving the arms and legs, you might get a little frustrated, but for the cost it's still not too bad.

I was drawn to the different print patterns on these from many of the other figs on the site.  They might be UV printed?  You can feel a raised texture on the torso, legs, but the quality seems pretty good to me.
 
The common issues with the knockoff figs can be a little bad here.  Some of the torsos and legs I could not separate except with a good amount of force.  Some of the legs are very hard to move, and the legs fit pretty snuggly on studs.
 
If you are looking mainly for display and infrequent posing, you shouldn't have any problems.  If you are constantly moving the arms and legs, you might get a little frustrated, but for the cost it's still not too bad.

No issues, as pictured. Be careful when putting together the horse so it can stand and not wobble if not on studs.

I might describe these as revolutionary, in the sense that the arms are not like standard minifigure arms.  As you can see in the picture, the arms do not have a rounded connection (like the standard one on the right in the image), rather there is an indentation and an extra piece that has a small ball on one side and a rectangle on the other. You can see that the arms slot and the interior of the torso is different to fit this unique arm.  Once you insert the two-piece shoulder-arm component, the arm can now also rotate away from the body.
 
I found this very unique and while rotating the arm away from the body all the way looked a little strange, being able to subtly move the arm away from the body seemed very cool to me. This was a major reason for my placing a second order on this site.
 
Additionally, the breastplate printing, shield printing, and weapons were very nice.
 
The torso / leg pattern on the Black Falcon and Lion Knight are basically the same except for the emblem, and also similar to other figures (like in the VP111, etc. series). I wished the Lion Knight print had more red or looked a little more different than the Black Falcon one, although the breastplate does cover it up. Overall the figs are pretty good and the legs and arms aren't as stiff as on some other figs from the site. You can have the problem where the head comes off with the helmet, especially if the chest armor is on and you don't have the full length of the neck to help keep the head on when removing the helmet.
 
One odd thing on these figures, is the color of the handle that goes on the back of the shield included.  Yes, the handle has to be added (I've seen this in some other figs), but that process is easy and has stayed on fine so far.  The Gondor fig had dark turquoise, the Black Falcon had black, and the Kraken had blue (Lion Knight had dark red, so that was ok). I swapped these out to better match the color of the faction, but if you only buy 1, then the handle on the shield might be a little off color-scheme wise.
 
Note that the Gondor / Aragorn that was listed in this grouping, does NOT have the unique ball-jointed arms, just the standard ones.  So that was disappointing.
 
I wish they would have more factions in this style with the unique arms, I find these much better than the VP series.

No complaints, look as expected. Color very nice on Black Falcon ones.

No complaints, horses look as pictured.  Unlike most of the horses I have ordered, these actually came pre-assembled.

The wings here are trans-red as opposed to a solid red color. Flame piece only seems to stay if placed at very back of mouth? Overall satisfied for the price.

Getting affordable Raven knight (N805) figures was the main reason I looked at this site and ordered.  The figures here are very nice for the price.
 
They have some of the common knockoff problems: stiff legs / arms, the pins in the plume / bird head accessory being hard to press into the helmet. The heads or helmet on these figures are somehow a little off, in that the helmet can pop off the head unless you really press it down. Probably not an issue unless you really want to constantly play with your figs.

It assembles almost identically; sometimes the larger plates didn't fit, but for the price, it's worth it!

Its amazing to build a bit complicated in the gearbox system but uts worth the hassle took me 1 day and half to build, the downside is the wiring is a total mess you have nowhere to hide it and place the cover and its a bit slow to drive and all the movements plus the motors are a bit weak for it, all in all i love it and its a nice accomplishment when you build it

J'ai effectué plusieurs achats minifigures et un moc, pour la 1ere fois sur ce site et tout s'est bien passé et la qualité de mes achats y était

This was a fun build. When all of the smaller components are assembled the final figure was great. The price was great as well. I love it.

Very good

Also hier gibt es nichts zu beanstanden, die Qualität der Steine ist hervorragend, keine Kratzer, nichts hat gefehlt. Auch die Aufkleber sind von guter Qualität, das hab ich schon deutlich schlechter gesehen. Ich kann das Set uneingeschränkt empfehlen.👍

Je recommence cette construction à tous les fans de LOTR.